Service Key - Sharp UP-820N Instruction Manual

Service key

Procedure
The screen continues.
Program each item as follows:
• TEXT (GLU) (Use the character entry method)
Description for the service key. Up to 12 characters can be
entered.
• HEADER ON BILL (Use the selective entry method)
YES : Enables header printing on the bill.
NO : Disables header printing on the bill.
• FOOTER ON BILL (Use the selective entry method)
YES : Enables footer printing on the bill.
NO : Disables footer printing on the bill.
• BILL PRINT (Use the selective entry method)
COMPULSORY:
NON-COMPULSORY: Non-compulsory bill printing
• OUTPUT KP No.1 thru 3 (Use the selective entry method)
ID number of the remote printer 1, 2 or 3 (1 digit: 1 to 9)
If the number "0" is entered, data will be printed on the remote printer.
• CHIT RECEIPT (Use the selective entry method)
YES : Prints on the chit receipt in the remote printer format.
NO : Prints nothing on the chit receipt.
• DATA ENT. JOB# (Use the numeric entry method)
Key data entry job no. (Capture job no: 0 thru 99)
When "0" is programmed, data capture entry is inhibited.
• EFT/ACCT PROG. (Use the selective entry method)
You can select EFT/ACCT compulsory or not-compulsory.
NOT COMPULSORY:
EFT COMPULSORY:
ACCT COMPULSORY: Compulsory ACCT
• EFT (Use the selective entry method)
Select the ACTION CODE from the following options:
AUTH-ONLY
DIAL
POST-AUTH
• EFT TYPE (Use the selective entry method)
Select the transaction type.
GIFT CARD
CHECK
DEBIT
CREDIT
— 174 —
Compulsory bill printing
Not-compulsory EFT/ACCT
Compulsory EFT