Customer Code; Customer Programming - Sharp UP-820N Instruction Manual

Customer code

Procedure

Customer programming

Procedure
NOTE If the following condition is satisfied, the code is deleted by deleting operation.
Date of deletion (Year, Month) Date of the last access (Year, Month) + programmed period + 1
[Ex.] Date of deletion = 8/(1 to 31)/2009, Period = 12 months:
Customer
Customer A
Customer B
Customer C
• PBAL DISPLAY (Use the selective entry method)
YES : Displays the customer's PBAL amount in case of customer entry.
NO : Does not display the customer's PBAL amount in case of customer entry.
• SERVICE DISPLAY (Use the selective entry method)
YES : Displays the customer's service amount in case of customer entry.
NO : Does not display the customer's service amount in case of customer entry.
Program each item as follows:
• NAME (Use the character entry method)
Enter a customer's name (max. 16 characters)
• ADDRESS (Use the character entry method)
On the second line, enter the customer's address (max. 40 charac-
ters)
• TEL# (Use the numeric entry method)
Enter a customer's telephone number (max. 24 characters)
Program each item as follows:
• PERIOD:MONTH (Use the numeric entry method)
Preset a period to delete customer detail data.
Enter the period months. (01 to 99)
If you enter "00", the customer detail data will not be deleted.
Date of the last access
(6/(1 to 30)/2008)
(7/(1 to 31)/2008)
(8/(1 to 31)/2008)
Deleted
Deleted
Not deleted
— 222 —