Upc Non-Plu Code Format - Sharp UP-820N Instruction Manual

UPC Non-PLU code format

EAN-13 type
Flag
(02 or 20-29)
Procedure
Select an arbitrary number, or the
desired UPC TYPE OF CODE &
SYSTEM CODE you set.
C
D
Free format
Price check digit
Field 1
Free format area
Program each item as follows:
• TYPE OF CODE (Use the selective entry method)
EAN-8: EAN-8 format code (consists of 8 digits)
EAN-13 (UPC-A): EAN-13 format code (consists of 13 digits)
• SYSTEM CODE (Use the numeric entry method)
System code (i.e. flag code): EAN-8: 1 digit, EAN-13: 2 digits
NOTE
ISBN/ISSN and press codes are always used the fixed format even if
code, 37, 43, 78, 98, or 97 is entered.
• LENGTH FIELD#1 (Use the numeric entry method)
Length of field 1 (number of digits): 0 to 9
• LENGTH FIELD#2 (Use the numeric entry method)
Length of field 2 (number of digits): 0 to 9
• FIELD#2 DATA (Use the selective entry method)
Meaning of field 2
QUANTITY : Quantity
PRICE : Price
• PRICE C/D (Use the selective entry method)
Price check digit
YES : Use the price check digit
NO : Not use the price check digit
• TAB (Use the selective entry method)
TAB or decimal point of field: 3/2/1/0
— 138 —
EAN-8 type
2
Free format
Flag
Field 2
C
D