Date/Time Setting; Date/Time - Sharp UP-820N Instruction Manual

Date/Time Setting

Use the following procedure to set the date and time:

Date/time

You can set the date and time for the POS terminal.
Procedure
1.
In the SETTING window, select "09 DATE/TIME."
• The DATE/TIME window will appear.
2.
Set each item as follows:
• DATE (Use the numeric entry method)
Enter the month (2 digits), day (2 digits), and year (2 digits) in this
sequence.
• TIME (Use the numeric entry method)
Set the time (max. 4 digits) on the military time (24-hour) system. For
example, to set 2:30 AM, enter 0230; and to set 2:30 PM, enter 1430.
The time will be printed and displayed on the real-time system. Once
you set the time, the internal clock will continue to run until the battery
goes dead and also update the date (month, day, year) when re-
quired.
— 192 —