Configure Your Router Via Quick Start Wizard - Draytek Vigor2100VG Quick Start Manual

2.2 Configure Your Router via Quick Start Wizard

Introduction
The Quick Start Wizard is designed for you to easily set up your broadband
Internet access. We already integrated Quick Start Wizard into the Web
Configurator of Vigor2100V/VG series. You can directly access the Quick Start
Wizard via Web Configurator.
You can also find the Ez Configurator from the router tool of firmware CD
enclosed with the package. As considering the convenience, we suggest you
to set up the Internet access via Quick Start Wizard built-in within the web
configurator.
Configure Your Router via Quick Start Wizard
Step 1. Open the web browser on a PC which is connected to the router and then
link to the gateway IP address of the router (the default setting is
192.168.1.1). Once your link (http://192.168.1.1) is successful, a pop-up
window will open to ask for username and password. Leave the default null
value and press OK to continue.
If you fail to access to the web configuration, please refer to "Trouble
Shooting" guide.
9