Table of Contents
Advertisement
1.1 Introduction
The Quick Start Wizard is designed for you to easily set up your
broadband Internet access. We already integrated Quick Start Wizard
into the Web Configurator of Vigor2100 series. You can directly
access the Quick Start Wizard via Web Configurator.
1.2 Configure Your Router via Quick Start Wizard
Step 1.
Open the web browser on a PC, which is, connected to the router
and then link to the gateway IP address of the router (the default
setting is 192.168.1.1). Once your link (http://192.168.1.1) is
successful, a pop-up window will open to ask for username and
password. Leave the default null value and press OK to continue.
If you fail to access to the web configuration, please refer to
Quick Start Wizard
Quick Start Wizard
"Trouble Shooting" guide.
1-1
Chapter 1
Advertisement
Table of Contents
