Draytek Vigor2100VG Quick Start Manual page 11

1.3.2 Vigor2100VG
LED Status
WLAN
on
blinking
E-mail blinking
WAN orange
green
blinking
VoIP green
orange
ACT (Activity) on
orange
LAN
green
)
(P1, P2, P3, P4
blinking
Interface Description
PWR Connect the included power adapter to the power outlet.
Line Connect to the analog phone line for PSTN life line.
Phone Connect to the analog phone for VoIP communication.
WAN Connect the Cable/ADSL modem to access the Internet.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking), press the hole and keep for more than 5 seconds. When the ACT
Factory Reset
LED begins to blink rapidly, release the button. Then the router will restart
with the factory default configuration.
P1, P2, P3, P4 Connect to the local network devices.
Explanation
The Wireless LAN function is active.
Data packets are transmitted over Wireless LAN.
When detecting one or more user-defined e-mails existing on
mail server.
A normal 10Mbps connection is through its corresponding port.
A normal 100Mbps connection is through its corresponding
port.
Ethernet packets are transmitting.
Solid light when the handset of phone is picked up (off
hooked).
Blinking per 2 seconds when phone is connected through
VoIP.
Solid light when phone call is via PSTN life line.
The router is powered on and running properly.
A normal 10Mbps connection is through its corresponding port.
A normal 100Mbps connection is through its corresponding
port.
Ethernet packets are transmitting.
5