Draytek Vigor2100VG Quick Start Manual page 36

Hide thumbs Also See for Vigor2100VG:

Table of Contents

B Hardware Reset

While the router is running (ACT LED blinking), press the button and hold for more

than 5 seconds. The ACT LED begins to blink rapidly, then release the button. The

router will restart with the factory default configuration.

After restore the factory default setting, please repeat Step 1 to Step 4 to reinstall

the router. Configure the router according to your recorded settings.

If the router does not work correctly, please contact your dealer for help. For any

further questions, please send e-mail to

support@draytek.com

Table of Contents

Vigor2100v