Draytek Vigor2100VG Quick Start Manual page 24

1. Mode:
Select an appropriate encryption to improve the security and privacy of
your wireless data packets.
Disable: Turn off the encryption mechanism.
WEP Only: Accepts only WEP clients and the encryption key should be
entered in WEP Key.
WEP or WPA/PSK: Accepts WEP and WPA clients simultaneously and the
encryption key should be entered in WEP Key and PSK respectively.
WPA/PSK Only: Accepts only WPA clients and the encryption key should
be entered in PSK.
2. WPA Encryption:
The WPA encrypts each frame transmitted from the radio using the
pre-shared key (PSK) which entered from this panel.
Pre-Shared Key (PSK): Either 8~63 ASCII characters or 64 Hexadecimal
digits leading by 0x can be entered. For example "0123456789ABCD...."
or "0x321253abcde.....".
3. WEP Encryption:
64-Bit: For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal
digitals leading by 0x can be entered. For example, ABCDE or
0x4142434445.
128-Bit: For 128bits WEP key, either 13 ASCII characters or 26
hexadecimal digits leading by 0x can be entered. For example,
ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D.
NOTE: 128 bits WEP is most secure, but has more encryption/decryption
overhead. Note that all wireless devices must support the same WEP encryption
bit size and have the same key. Four keys can be entered here, but only one key
can be selected at a time. The keys can be entered in ASCII or Hexadecimal. Click
the circle under Use next to the key you wish to use.
4. Click OK to save settings.
18