Introduction; Intended Use; Depicted Components; Package Contents - Parkside 285794 Translation Of The Original Instructions

BELT SANDER PBSD 600 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The belt grinder is designed for the dry surface
sanding of wood, plastic, metal and plaster and
painted surfaces (depending on the type of sand-
paper used). The appliance may only be used
for dry sanding. Please note that you need to use
appropriate abrasive belts with different grains for
working different materials, and that you may need
to adapt the speed to suit the material. The appli-
ance is not intended for commercial use. Any other
use of or modification to the appliance is deemed
to be improper and carries the risk of serious per-
sonal injury. The manufacturer accepts no responsi-
bility for damage(s) attributable to misuse.

Depicted components

ON/OFF switch
Additional handle (rubberised grip)
Front cover
Clamping lever for abrasive belt
Belt speed adjusting wheel
Handle (rubberised grip)
Screw for adjusting the handle
Recesses for screw clamps
Connection for dust collector
Locking button for ON/OFF switch
Dust collector
Adjustment screw for belt tracking
Abrasive belt
Screw clamp
Reducer
Dust extraction adapter
│ GB │ MT
■ 38

Package contents

1 belt sander PBSD 600 A1
1 abrasive belt for wood (grain 80)
1 dust collector
1 dust extraction adapter and reducer (for external
dust extraction)
2 screw clamps
1 set of operating instructions

Technical data

Rated voltage:
Rated power
consumption:
Idling belt speed:
Rated idling speed:
Abrasive belt:
Protection class:
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
Total vibration value:
Total vibration value (vector total of three direc-
tions) determined in accordance with EN 60745:
Grinding with the grinding disc: a
Uncertainty K = 1.5 m/s
230 V ∼50 Hz
(AC)
600 W
170–250 m/min
n 360–560 rpm
0
75 x 457 mm
II / (double insulation)
L = 91 dB (A)
pA
K = 3 dB
pA
L = 102 dB (A)
WA
K = 3 dB
WA
= 4.2 m/s 2
h
2
PBSD 600 A1