Introduction; Proper Use; Features And Equipment; Included Items - Parkside 273101 Operation And Safety Notes

Introduction

Delta sander PDS 290 B2
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Proper use

Q
This device – when combined with the appropriate
sandpaper – is suitable for dry-sanding wood, plastic,
metal, filler and painted surfaces. The device is par-
ticularly suitable for corners, profiles or difficult to
access places. Any other use or modification to the
device shall be considered as improper use and
could give rise to considerable dangers. We will
not accept liability for loss or damage arising from
improper use. Not suitable for commercial use.

Features and equipment

Q
ON / OFF switch
1
Oscillation speed setting wheel
2
Mains lead
3
Dust extraction spout
4
Ventilation openings
5
Backing plate (360° rotatable)
6
Adapter for external vacuum extraction
7
Reducer piece
8

Included items

Q
1 Delta sander PDS 290 B2
3 Sanding sheets
1 Adapter for external vacuum extraction
14 GB
1 Reducer piece
1 Operating instructions

Technical information

Q
Nom. power input:
Rated voltage:
Nominal speed:
Nom. oscillation speed: n
Backing plate:
Protection class:
Noise and vibration data:
Measured values for noise are determined in accord-
ance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
Uncertainty K = 1.5 m / s
Note: The vibration level specified in these instruc-
tions was measured in accordance with an EN 60745
standardised measurement process and can be used
to compare tools. The vibration emission value spec-
ified can also serve as a preliminary assessment of
the exposure.
Different uses of the power tool give rise to different
vibration levels and in many cases they may exceed
the values given in these instructions. It is easy to
underestimate the vibration load if the power tool is
used regularly in particular circumstances.
Try to keep the vibration loads
as low as possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the work-
ing time. Wherein all states of operation must be in-
cluded (e.g. times when the power tool is switched
off and times where the power tool is switched on
but running without load).
290 W
230 V∼, 50 Hz
n 6000–11000 rpm
0
12000–22000 rpm
0
360° rotatable
II /
82 dB(A)
93 dB(A)
3 dB
= 8.2 m / s
2
2