Introduction; Intended Use; Features; Package Contents - Parkside 427539 2301 Original Instructions Manual

MULTI SANDER PPS 200 C2

Introduction

Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for the dry sanding of
wood, metal and paintwork. Any other uses of the
appliance are considered improper and carry the
risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attributable
to misuse. This appliance is not intended for com-
mercial use.

Features

1 Grip
2 Release button
3 Dust collector
Dust bag
3a
4 Nozzle (suction)
5 Adapter for external vacuum extraction
6 Sanding plate (rectangular)
7 Sanding sheet
8 Sanding plate (triangle bottom)
9 Sanding plate (triangle top)
0 ON/OFF switch

Package contents

1 multi sander
3 sanding sheets (120 grain)
1 dust collector
1 adapter for external vacuum extraction
1 set of operating instructions
│ GB │ IE
■ 2

Technical data

Nominal voltage
Nominal power input
Nominal speed
Nominal oscillation speed
Sanding sheet dimensions
Protection class
Noise and vibration data
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level
Sound power level
Uncertainty
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
230 V ∼, 50 Hz (AC)
200 W
n 14000 rpm
0
n 28000 rpm
0
rectangular
112 x 112 mm
Triangle
93 x 93 x 92 mm
II / (double
insulation)
L = 78.5 dB (A)
PA
L = 89.5 dB (A)
WA
K = 3 dB
a = 5.71 m/s 2
h
K = 1.5 m/s 2
PPS 200 C2