Introduction; Intended Purpose - Parkside PAAP 12 C3 Translation Of The Original Instructions

Content
Introduction ............................... 19
Intended purpose ....................... 19
General description .................... 20
Extent of the delivery ....................... 20
Overview ....................................... 20
Functional description ...................... 20
Technical data ............................ 20
Safety instructions ...................... 21
Symbols and icons .......................... 21
General Safety Directions for Power
Tools .............................................. 22
Joint safety instructions for sandpaper
sanding and polishing .................... 24
Special safety instructions for
polishing ........................................ 25
Special safety instructions for sanding 26
Kickback and corresponding safety
instructions ..................................... 26
Assembly ................................... 27
Assembling/disassembling the
polishing disc ................................. 27
Attaching/changing the attachments . 27
Attaching the additional handle ........ 27
Operation .................................. 27
Removing/inserting the Battery ......... 27
Switching on/off ............................. 27
Charging the battery ....................... 28
Choice of gear ............................... 28
Checking the battery charge level ..... 28
Working instructions .................. 28
Securing the workpiece .................... 28
Touching up .................................... 28
Polishing ........................................ 29
Selection of attachment .................... 29
Cleaning and maintenance ......... 29
Cleaning ........................................ 29
Maintenance .................................. 29
Storage ...................................... 30
Disposal and protection of the
environment .............................. 30
Replacement parts/accessories ... 30
Guarantee ................................. 30
Repair Service ............................ 32
Service-Center ............................ 32
Importer .................................... 32
Translation of the original EC
declaration of conformity .......... 141

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
and for the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended purpose

The device is suitable for polishing or san-
ding paints, plastics, coatings and other
smooth surfaces.
ny other use that is not explicitly approved
in these instructions may result in damage
to the equipment and represent a serious
danger to the user.The user or operator is
GB IE
19