Lan Problems - Epson ExpressStation User Manual

LAN Problems

firmly connected the correct cable to one of the LAN ports
on the back of the computer (the TPE or AUI port).
Also verify that you enabled the built-in LAN controller and
selected the correct LAN port when you ran the SETUP
program or the System Configuration utility. See Chapter 1
or of the
2
Review the instructions in Chapter
on installing the MS-DOS LAN drivers and make sure you
installed the drivers correctly.
documentation that came with the card for information
about connecting it to the LAN and installing the necessary
drivers.
documentation that came with the software for specific
troubleshooting information.
and you are using a memory manager program such as
QEMM-386™ or 386MAX™ try removing the program from
memory and rebooting your computer.
problem, run the System diagnostic LAN adapter test. See
the
Software Guide
for more information.
Software Guide
for instructions.
of the
7 Software Guide
Troubleshooting
A-21