Removing Memory Modules - Epson ExpressStation User Manual

To insert the SIMM, place it in the socket at an angle and
firmly press it in.
4. Gently rotate the top of the SIMM toward the front of the
main system board until it is vertical and clicks into place in
the metal retaining clips.
Make sure the SIMM is fully inserted into the socket. If it is
not, gently pull away the clips at each end of the SIMM,
pull the SIMM away from the socket, and try again.
5. Repeat steps 2 through 4 for each SIMM you want to install.

Removing Memory Modules

If you need to remove memory modules from your computer,
follow these steps:
1. If necessary, see the main system board map on page 3-2 to
locate the SIMM sockets.
2. Remove the SIMM from the socket farthest from the front
of the main system board first.
3-10 Installing and Removing Options