Epson ExpressStation User Manual page 75

The computer starts but does not boot.
If the computer starts but does not load your operating system,
the problem could be caused by many different factors.
First make sure you have correctly formatted your hard disk
and have properly installed your operating system on it. (See
"Hard Disk Problems" on page A-15.)
If you do not have a hard disk, insert a system diskette in
drive A and press the reset button.
The computer does not respond when you type.
If you have just turned on the computer, check the following:
computer.
system, see "Password Problems" below.
If you are running a software program, try these procedures:
performing a complex task, it may take a long time to
complete its work. If the computer does not respond after a
reasonable length of time, proceed to the next step.
software program and reboot the computer.
at least five seconds. If you do not have a hard disk drive,
insert a bootable diskette in drive A. Then turn on the
computer and try running the program again.
documentation or contact your software manufacturer for
technical support.
Troubleshooting
A-8