Epson ExpressStation User Manual page 31

Both the BIOS SETUP program and the System Configuration
utility allow you to define the default setting for the speaker.
Follow the instructions in your
If you want to change the default setting temporarily, use the
EISA System Utilities, as described below. Then, whenever you
turn off or reset the computer, the setting returns to the default
setting you selected in the BIOS SETUP program or the System
Configuration utility.
1. To start the System Configuration program, insert the
Reference diskette in drive A.
2. Log onto drive A and type SD. Press w at the next two
screens to bring up the Main Menu.
3. Select Access System Utilities from the Main Menu.
You see the following:
Password Utility
System Speed FAST
System Speed SLOW
Speaker ON
Speaker OFF
Cache ON
Cache OFF
EXIT Utilities
4. Select Speaker ON or Speaker OFF. You see a message
confirming the new setting.
5. Press CEnter) to return to the System Utilities Menu. Then
follow the instructions on the screen to exit the System
Configuration program.
The setting you define will remain in effect until you turn off or
reset the computer, or until you change it to a different setting.
Using Your Computer
1-14
S y s t e m U t i l i t i e s M e n u
Software Guide.