Installing A Math Coprocessor - Epson ExpressStation User Manual

Installing a Math Coprocessor

Follow these steps to install a math coprocessor:
1. If necessary, see the main system board map on page 3-2 to
locate the math coprocessor socket.
2. Locate the orientation dot in one corner of your coprocessor
and turn the coprocessor so that the dot is in the position
shown below. Be sure the dot is aligned with the arrow on
the main system board.
Caution
If you insert the math coprocessor in the wrong position,
you could permanently damage it.
3. Line up the coprocessor pins with the holes in the socket.
Then gently push the coprocessor into the socket, pressing
evenly on all sides. Examine the coprocessor to be sure it is
inserted all the way into the socket.
3-12
Installing and Removing Options