Password Problems - Epson ExpressStation User Manual

4. If you removed the computer's cover, replace it now. Then
turn on the computer.
If the power supply shuts off again after you follow the steps
above to correct the problem, contact your dealer.

Password Problems

If you set a power-on, network, or keyboard password and you
have trouble entering it, check the section below that describes
the problem you are having.
You enter the password, but nothing happens.
Type the password again and press [Enter. You have three
chances to enter a power-on or network password correctly
before the system locks up. If this happens, press the reset
button to reboot the computer and try again. You can try as
many times as necessary to enter a keyboard password.
You want to change or delete the password.
See Chapter 1 for instructions on changing or deleting your
password.
You have forgotten the current power-on password.
If you have forgotten your power-on password and cannot use
your computer, follow these steps:
1. Turn off the computer, remove the cover, and clear the
password by moving the main system board jumper J21
from pins 4-6 to pins 2-4. See Chapter 2 for instructions on
removing the cover and Chapter 3 for instructions on
changing the jumper setting.
2. Replace the computer's cover. (See Chapter 2.)
A-10
Troubleshooting