Installing Memory Modules - Epson ExpressStation User Manual

Be sure to follow these guidelines when you install SIMMs:
three SIMMs
example, install two 4MB SIMMs instead of one 8MB SIMM
main system board first.
Once you have determined where to add SIMMs, follow the
instructions below to install them. If you need to remove any,
see "Removing Memory Modules" on page 3-10.
To install 32MB of memory you must remove the 4MB
SIMM that came with your system and install four 8MB
SIMMs when they became available.

Installing Memory Modules

Follow these steps to install SIMMs:
1. If necessary, see the main system board map on page 3-2 to
locate the SIMM sockets.
2. Ground yourself by touching the top of the drive housing to
prevent static discharge and damage to your SIMMs.
3. Install the first SIMM in the first empty socket closest to the
front of the main system board. Position each SIMM so its
notched edge is toward the left side of the computer.
Installing and Removing Options 3-9