Power Supply/Charger Specifications; Connection; Lights; Voltage - Emerson 475 User Manual

94
POWER
SUPPLY/CHARGER
SPECIFICATIONS

Connection

Lights

Voltage

Technical data

Green six-pin mini din (male) plug
The power supply/charger has three colored lights that indicate the
conditions below. Each light displays a different color.
Color
Green
Flashing green
Yellow
Flashing yellow
Flashing yellow and
red
Red
100-240 VAC, 50/60Hz,
US/UK/EU connection types included
Input voltage
Input current
Standby current
Input fuse type
Output voltage 1
Output current 1
Output voltage 2
Output current 2
Output power rating
Operating temperature
Storage temperature
Measurements [L x B x H]
Total Mass
Altitude
Pollution Degree
Installation Category
IEC Protection Class
Condition
The battery is fully charged.
The battery is nearly fully charged.
The battery is charging.
The power supply/charger is not connected
to the 475 Field Communicator.
The remaining charge in the battery is low.
Charging cannot occur. Contact Technical
Support for more information.
100 - 240 VAC ±10%
750 mA max.
20 mA max.
TES 2A 250 V Timelag
0 - 8.3 V
1000 mA max.
0 - 9.0 V
1400 mA max.
20 W
0°C - +40°C
-20°C -+80°C
112 mm x 51.5 mm x 29.5 mm
240 g.
Up to 2000m
2
2
Double Insulation