Lights; Operating Time; Storage; Power Supply/Charger Specifications - Emerson 475 User Manual

Lights

Operating Time

Storage

POWER
SUPPLY/CHARGER
SPECIFICATIONS

Connection

Lights

Voltage

Five lights (LEDs) on the side of the battery indicate the remaining level of battery
charge. When you press and release the Charge Indicator button below these lights,
the lights slowly illuminate. Each light indicates 20 percent of remaining charge, and
the battery is fully charged when all of the lights are illuminated. See Figure 2-1 on
page 2-3 for the location of the Charge Indicator button.
10 or more hours when the backlight is to highest setting
20 or more hours when the backlight is off
80 or more hours when using standby
-4°F to +131°F (-20°C to +55°C) less than one month
Storage Guidelines for the Li-Ion Battery
• Use a location at room temperature or cooler. Prolonged storage at higher
temperatures can permanently reduce the charge capacity and performance.
• Ensure the remaining charge is at or near mid-capacity. The charge will slowly drain
during storage. Periodically recharge the battery during storage to ensure it does
not drain to low levels.
Green six-pin mini din (male) plug
The power supply/charger has three colored lights that indicate the conditions below.
Each light displays a different color.
Color
Green
Flashing green
Amber
Flashing amber
Flashing amber and red
Red
100-240 VAC, 50/60Hz,
US/UK/EU connection types included
Condition
The battery is fully charged.
The battery is nearly fully charged.
The battery is charging.
The power supply/charger is not connected to the 475
Field Communicator.
The remaining charge in the battery is low.
Charging cannot occur. Contact Technical Support for
more information.
A-3