Emerson 475 User Manual page 43

HART functionality
variables marked. Double-tap Unmark all | OK to clear the marks
from all variables.
To mark and edit variables individually:
a.Double-tap Edit individually.
b.Scroll through the list of variables and select the variable you want
to mark or edit. To change the value for the selected variable, tap
EDIT, change the value, and tap ENTER. A "*" symbol appears
next to the variable name and the value is highlighted yellow to
indicate the change has not been saved.To mark the selected
variable, tap MARK. A "+" symbol appears next to the value.
c.Repeat these steps for other variables as necessary.
d.Tap Exit.
5.Tap SAVE.
Copying a saved configuration
The Copy to option lets you copy a saved configuration to a new
storage location in the 475 Field Communicator.
To copy a saved configuration:
1.Open a saved configuration. See "Opening a saved configuration" on
page 42.
2.Double-tap Copy to from the Saved Configuration menu.
3.Double-tap Location and select the new storage location to which
you want to save the configuration, and tap ENTER.
4.Double-tap Name, enter the name for the copy of this configuration,
and tap ENTER.
5.Tap SAVE to copy the configuration to a new location.
Sending a saved configuration to a connected device
The Send option lets you send the open configuration to a connected
device. From the Saved Configuration menu, double-tap Send. The
475 Field Communicator sends the configuration to a connected
device that is compatible with the configuration.
Deleting a saved configuration
The Delete option lets you remove saved configurations one at a time.
To delete a configuration from the 475 Field Communicator storage:
1.Open a saved configuration. See "Opening a saved configuration" on
page 42.
2.Double-tap Delete from the Saved Configuration menu.
3.Tap Yes to confirm the deletion. Tap No to cancel.
43