Table of Contents
Advertisement
Troubleshooting
Forward Compatibility Blocked...The
Device Description for x Device Rev
x dd Rev x cannot be used in forward
compatibility mode...x... Press OK
to load the Generic Device
Description.
Device Description Not
Installed...The Device Description
for device type x device rev x is not
installed on the System Card...See
Programming Interface for details on
Device Description updates...Do you
wish to proceed in forward
compatibility mode?
Do you want to ignore this message
while communicating with this
device?
The HART Application attempts to
use a device description to run in
forward compatibility mode and
cannot. A generic device
description will be used.
The device description for the
connected device is not in the 475
Field Communicator. If you have
the Easy Upgrade option, you can
add device descriptions to your
475 Field Communicator from the
Field Communicator Easy
Upgrade Utility.
The HART Application lets you
ignore some response code
warning messages, such as
Update Failure, while
communicating with a device. The
next time you communicate with
the device, this message will
appear.
87
Advertisement
Table of Contents
