Transferring Configurations To A Pc Application - Emerson 475 User Manual

44
Transferring
configurations to a PC
application
Renaming a saved configuration
The Rename option lets you change the name of a saved
configuration.
To rename a saved configuration:
1.Open a saved configuration. See "Opening a saved configuration" on
page 42.
2.Double-tap Rename from the Saved Configuration menu.
3.Double-tap the file you want to rename.
4.Enter the new file name and tap ENTER.
5.Tap SAVE.
Comparing two saved configurations
Any two configurations can be compared. A message appears
indicating if differences exist, but the specific differences are not
displayed.
To compare two saved configurations:
1.Open a saved configuration. See "Opening a saved configuration" on
page 42.
2.Double-tap Compare from the Saved Configuration menu.
3.Double-tap Location and select the storage location containing the
other configuration that will be used in this comparison and tap
ENTER.
4.Double-tap Name to select the desired file to compare.
5.Tap COMP to compare the configurations.
6.Tap OK when you are finished.
You can transfer configurations (.hcf files) from the 475 Field
Communicator to AMS Device Manager or the Field Communicator
Easy Upgrade Utility. After you transfer the configuration, you can
perform different operations depending on the application used.
AMS Device Manager
Use AMS Device Manager to open, edit, compare, and transfer saved
configurations. A Handheld or Field Communicator Interface kit for
AMS Device Manager (version 6.2 or higher) lets you use the 475 Field
Communicator with AMS Device Manager.
If the System Card does not appear as a storage location in AMS
Device Manager, copy the configurations from the System Card into
the Internal Flash in the 475 Field Communicator before connecting to
AMS Device Manager. See "Copying a saved configuration" on page
43 for instructions. Then access the Internal Flash location to open,
edit, and save the configurations in AMS Device Manager. See the
AMS Device Manager Books Online for more information on
connecting and transferring configurations.
HART functionality