Geofence (Astro 25 Trunking System) - Motorola APX 6000XE User Manual

another radio without passing through any infrastructure
facility such as repeaters, phone, or DVRS system. Both
the transmitting radio and receiving radio must be
configured to enable them to send and/or receive the GPS
coordinates. You can check with your nearest qualified
technician for more details.
NOTICE:
If the receiving radio is operating in a Mixed Mode
channel, and the voice transmission is through the
conventional ASTRO system then the radio can
receive the location coordinates of its peers.
This feature is also operable in a Scan Active channel or
Scan Talkback channel.
Upon receiving a voice transmission with GPS coordinates
enabled on the receiving radio, the display shows the
coordinates available in full or in short coordinates. There
are two different formats available. Refer to the following
list for the details shown in the Peer-Location quick text.
Consult your agent to pick the best format to configure to
your radio.
Full location coordinates
• PTT ID (This is optional.)
• Longitude and latitude
• Relative distance or direction
Send Feedback
Short location coordinates
• PTT ID (This is optional.)
• Longitude and latitude
NOTICE:
If the transmitting radio is stale at its location after a
period of time, the receiving radio display shows
ID:<PTT ID> Last Knwn Loc: <Coordinates>. The
ID:<PTT ID> and <distance> are optional details
depending on the requirements of usage.
If the transmitting radio does not have GPS or the
receiving radio could not decode the GPS signal of
the received signal, the receiving radio display
shows ID:<PTT ID> Unknown Loc. The PTT ID is
optional to be shown on the display per
requirements of usage.
Geofence (ASTRO 25 Trunking
System)
Geofence is a virtual perimeter based on the GPS to define
a geographical area on earth.
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.
English
131