APRILIA TUAREG 660 Instruction Manual page 46

Activate the "pairing" mode of the bluetooth headset to be paired (refer to the in-
structions of the device itself). Press the Bluetooth icon on the main screen of the
"APRILIA" application and perform a new search for devices until the headset is dis-
played. Select the bluetooth headset, check the "Handsfree/driver headset" option
and press "Pair". Successful pairing is indicated by the helmet icon displayed on the
digital display. If the pairing is not successful, perform a new search.
Repeat the operation to connect a second device also. If this pairing procedure is
successful, the 2nd helmet icon will be highlighted in black on the digital display.
02_45
No multimedia function can be managed from the handlebar of the vehicle if there is
no bluetooth headset, or if the headset is directly connected to the smartphone. The
pairing of the bluetooth headset to the vehicle is only possible via the "APRILIA"
application and this must be connected to the vehicle in order to correctly use
the multimedia functions of the system. For this reason, the headsets that au-
tomatically connects to the smartphone are not compatible (Ex: Apple Airpods).
02_46
If pairing between Smartphone and Vehicle is not successful, proceed as fol-
lows:
•
restart the smartphone;
•
turn the ignition key to "OFF" and then to ON"; wait for the animation on the
display to end.
If the smartphone icon on the display is not illuminated after approximately 1 minute,
proceed as follows;
•
open "APRILIA" and select "Connect";
•
select your vehicle from the list of suggestions and follow the instructions on
the device;
46