Lexus ES-300 2001 Manual page 108

6. Test the operation of the HomeLink
newly programmed button. Check to see if the
gate/device operates correctly.
7. Repeat steps 1 through 6 for each remaining
R
HomeLink button to program another device.
Programming other devices
To program other devices such as home security
systems, home door locks or lighting, contact your
authorized Lexus dealer for assistance.
Reprogramming a button
R
Individual HomeLink buttons cannot be erased,
however, to reprogram a single button, follow the
procedure "Programming the HomeLink
(b) Operating the HomeLink
R
To operate the HomeLink , press the appropriate
R
HomeLink button to activate the programmed device.
R
The HomeLink indicator light should come on. The
R
HomeLink continues to send the signal for up to 20
seconds as long as the button is pressed.
R
by pressing the
(c) Erasing the entire HomeLink
memory (all three programs)
To erase all previously programmed codes at one time,
press and hold down the 2 outside buttons for 20
seconds until the indicator light flashes.
If you sell your vehicle, be sure to erase the programs
stored in the HomeLink
R
".
R
INTERIOR EQUIPMENT
R
R
memory.
91