Setting
Security Protocol
Algorithm Settings
Combinations of Local Address (Scanner) and Remote Address (Host) on Group Policy
Setting of Local Address (Scanner)
Setting of Remote
IPv4
Address (Host)
1
IPv4
Yes
1, 2
IPv6
—
Blank
Yes
1
If you selected IPsec as the Access Control option, you cannot specify a prefix length
2
If you selected IPsec as the Access Control option, you can select a link-local address (fe80::), but the
group policy will be disabled.
3
You cannot use IPv6 link-local addresses.
Group Policy Guidelines
Service name
Protocol type Local/Remote port
Any
—
ENPC
UDP
Options/Description
If you selected IPsec as the Access Control option,
select one of these security protocols:
ESP: to ensure the integrity of authentication and data,
and encrypt data
AH: to ensure the integrity of authentication and data; if
data encryption is prohibited, you can use IPsec
Select the encryption algorithm settings for the security
protocol you selected
2
IPv6
—
Yes
Yes
Controls these operations
number
—
All services
3289/Any port
Searching for a product from
applications such as Epson Device
Admin and the scanner driver
212
3
Any addresses
Yes
Yes
Yes