Note: When importing values that include individual information such as a scanner name or IP address,
make sure the same IP address does not exist on the same network.
1. Access Web Config and select the Device Management tab.
2. Under Export and Import Setting Value, select Import.
3. Click Browse and select the exported settings file.
4. If necessary, enter the decryption password.
5. Click Next.
6. Select the settings to import and click Next.
7. Click OK.
The selected settings are imported to the product.
Parent topic:
Related tasks
Accessing the Web Config Utility
Using Your Product on a Secure Network
Follow the instructions in these sections to configure security features for your product on the network
using the Web Config software.
Configuring Protocols and Services in Web Config
Protocol Settings
Using a Digital Certificate
Configuring SSL/TLS Communication
Configuring IPsec/IP Filtering
Connecting the Product to an IEEE 802.1X Network
Using Epson Device Admin Configuration Software
Parent topic:
Configuring Protocols and Services in Web Config
You can enable or disable protocols using Web Config.
1. Access Web Config and select the Network Security tab.
2. Select Protocol.
Importing and Exporting Product Settings
Administering Your Product
196