Heat Sink - HP ZBook Power G10 Maintenance And Service Manual

To install the speakers, reverse this procedure.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 5-15 Heat sink descriptions and part numbers
Description
For use in models with discrete graphics memory
For use in models with UMA graphics memory
Thermal pad kit (includes three pads)
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the heat sink:
1. In the order indicated on the heat sink, remove the six Phillips M2.0 × 4.0 screws (1) that secure the
heat sink to the system board.
58 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 37).
Spare part number
N55740-001
N55741-001
N58326-001
Battery on page 39).
37).