Table of Contents
Advertisement
Table 5-3
Solid-state drive descriptions and part numbers (continued)
Description
256 GB, PCIe + 16 GB Optane memory
Thermal pad for use with solid-state drive
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1.
Remove the tape that secures the solid-state drive metal cover (1).
2.
Remove the Phillips M2.0 × 2.0 screw (2) that secures the cover and drive to the computer.
3.
Lift the metal cover off the solid-state drive (3).
4.
Pull the drive away from the socket to remove it (4).
To install the solid-state drive, reverse the removal procedures.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-4
Memory module descriptions and part numbers
Description
8 GB, DDR4-3200
Preparation for disassembly on page
Bottom cover and rubber feet on page
29).
29).
Battery on page
31).
Spare part number
L85356-005
M45025-001
Spare part number
L46598-005
Memory modules
33
Advertisement
Table of Contents
