Table of Contents
Advertisement
104 Maintenance
Replacing the fan in the incoming cubicle (frame R7i)
￭
WARNING!
Obey the safety instructions given in
cabinets and modules safety instructions (3AXD50000048633
If you ignore the safety instructions, injury or death, or damage to the
equipment can occur.
If you are not a qualified electrical professional, do not do installation
or maintenance work.
WARNING!
Use the required personal protective equipment. Wear protective gloves and
long sleeves. Some parts have sharp edges.
1.
Stop the drive and do the steps in section
before you start the work.
2.
Open the door of the incoming cubicle.
3.
Remove the assembly plate of the BAMU unit.
4.
Disconnect the wiring of the fan.
5.
Remove the eight screws of the fan unit and slide the fan unit out.
6.
Install a new fan in reverse order.
7.
Close the door.
3
5
ACS880 liquid-cooled multidrive
Electrical safety precautions (page 43)
[English]).
Advertisement
Table of Contents
