Table of Contents
Advertisement
102 Maintenance
Replacing the cabinet fan in the module cubicle (frame R7i)
￭
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
WARNING!
Use the required personal protective equipment. Wear protective gloves and
long sleeves. Some parts have sharp edges.
1.
Stop the drive and do the steps in section
before you start the work.
2.
Remove the shrouding in front of the fan (if any).
3.
Disconnect the fan wiring.
4.
Remove the four screws and pull the fan unit out.
5.
Install new fan in reverse order.
4
Electrical safety precautions (page 43)
Advertisement
Table of Contents
