Removing shrouds
1.
Open the door of the incoming cubicle.
2.
Remove the shrouding and assembly plates covering the input terminals.
Connecting the cables
This section describes the power cable connecting procedure for a bottom cable entry
with the standard cable entry plate. The standard cable entry plate has conductive
sleeves for the 360 degree grounding of the cable shields. If the drive or unit has
another type of cable entry plate, such as a Roxtec cable entry plate (option +H394),
or cable gland plate (option +H358), refer also to the instruction of the related non-ABB
installation accessories. For example, the Roxtec instructions or the instructions by
the cable gland manufacturer.
Electrical installation 49
2
11