Table of Contents
Advertisement
Web Configurator – Multy M1
5.1 Overview
This chapter describes how to access the Multy Device Web Configurator and provides an overview of
its screens.
The Web Configurator is an HTML-based management interface that allows easy system setup and
management through Internet browser. Use a browser that supports HTML5, such Mozilla Firefox, or
Google Chrome. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
5.2 Accessing the Web Configurator
Make sure your Multy Device hardware is properly connected (refer to the Quick Start Guide).
1
Launch your web browser.
2
If the Multy Device is in Standard Mode (the default mode), enter "http://zyxelwifi.com or 192.168.212.1"
3
in the browser's address bar.
If the Multy Device is in Bridge Mode, enter "http:// (DHCP-assigned IP)" in the browser's address bar.
On the displayed login screen, log in using your myZyxelCloud username and password or the local
4
password.
Note: If this is the first time you are accessing the Web Configurator or if the device has been
reset, you must complete the setup wizard, see
Note: For setting and changing the local password, see
Multy WiFi System User's Guide
138
C
H A P T E R
(WSM20)
Chapter 4 on page
128.
Section 7.9 on page
5
165.
Advertisement
Table of Contents
