ZyXEL Communications WSQ60 User Manual page 37

The following are the LED descriptions for your Multy Device.
Table 6 WSQ60 / WSQ50 / WSQ20 LED Descriptions
COLOR STATUS
Off
White Blinking
On
Blue Blinking
On
Red On
Slow Blinking
Fast Blinking
Table 7 WSR30 LED Descriptions
COLOR STATUS
Off
White Blinking
On
Blue Blinking
On
Pink or Blue Rotate
Amber Blinking
Fast Blinking
Red On
Table 8 WSM20 LED Descriptions
COLOR STATUS
Lake Green On
Blinking
Off
Green On
Blinking
Yellow On
Blinking
Red On
Pink Blinking
Chapter 2 Hardware
DESCRIPTION
The Multy Device is not receiving power.
The Multy Device is booting up, undergoing firmware upgrade, or being
configured.
The Multy Device is on and connected to the Internet.
Bluetooth is enabled on the Multy Device.
The Multy Device in extender mode is connecting to the primary Multy.
The Multy Device in primary Multy mode failed to connect to the Internet, the
Multy Device in extender mode cannot connect to the primary Multy,
Bluetooth is not working on the Multy Device, or the Multy Device
encountered a system error.
An error occurred during firmware update.
The Multy Device is in the process of restoring to default.
DESCRIPTION
The Multy Device is not receiving power.
The Multy Device is booting up.
The Multy Device power is on.
The Multy Device Bluetooth is being configured.
The Multy Device Bluetooth is ready.
The Multy Device is ready for use. Rotate here means the pink light will move
around the LED indicator while the blue light is stationary.
The Multy Device is undergoing firmware upgrade.
The Multy Device is being reset.
The Multy Device in primary Multy mode failed to connect to the Internet or
the Multy Device in extender mode cannot connect to the primary Multy.
DESCRIPTION
The Multy Device is receiving power and ready for use.
The Multy Device is booting up.
The Multy Device is not receiving power.
The Multy Device is ready for use.
The Multy Device setup process is in progress. The Multy Device WAN/Wireless
Web Configuration setup process is in progress.
The Multy Device is updating firmware.
The Multy Device is being reset.
TheMulty Device in Multy Router mode failed to connect to the Internet.
OR
The Multy Device in extender mode cannot connect to the Multy Router.
The Multy Device is setting up a WPS connection with another Multy Device.
Multy WiFi System User's Guide
37