ZyXEL Communications WSQ60 User Manual page 216

Chapter 9 Web Interface Tutorials – Multy M6E (WSQ65)
Click Add New ACL Rule and use the following fields to configure and apply a new ACL (Access Control
4
List) rule.
Filter Name: Enter a name to identify the firewall rule.
4a
Order: Assign the order of your rules as rules are applied in turn.
4b
Select Source IP Address: If you want the source to come from a particular (single) IP, select
4c
Specific IP Address. If not, select from a detected device.
Source IP Address: Enter the IP address of the computer that initializes traffic for the application or
4d
service.
Select Destination Device: If you want your rule to apply to packets with a particular (single) IP,
4e
select Specific IP Address. If not, select a detected device.
Destination IP Address: Enter the IP address of the computer to which traffic for the application or
4f
service is entering.
MAC Address: Enter the MAC address of the Multy Device.
4g
Multy WiFi System User's Guide
216