Key Control Panel - Dürkopp Adler 52 i-75 Series Operating Instructions Manual

56

4.13.2 Key control panel

Pic. 17: Key control panel
(1) - Hand backtacking
Key Function
1 Hand backtacking
When the key is pressed at sewing, the sewn material is feed
backwards.
Needle positioning in upper or bottom position
2
By the parameter the key function can be defined:
1 = needle up/down
2 = needle up
3 = one stitch
(factory setting is 1)
Operating Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
①
②
(2) - Needle position
Operation