Lexmark M C240FW User Manual page 93

Use printer menus
Menu item
Contrast
Best for Content*
0
1
2
3
4
5
Background Removal
Level
‑4 to 4 (0*)
Scan Edge to Edge
On
Off*
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Automatic Redial
0–9 (5*)
Redial Frequency
1–200 minutes (3*)
Enable ECM
On*
Off
Enable Fax Scans
On*
Off
Driver to Fax
On*
Off
Allow Save as Shortcut
On*
Off
Max Speed
33600*
14400
9600
4800
2400
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the contrast of the output.
Adjust the amount of background visible on a scanned image.
Allow edge‑to‑edge scanning of the original document.
Description
Adjust the number of redial attempts based on the activity levels of recipient fax
machines.
Increase the time between redial attempts to increase the chance of sending
fax successfully.
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax transmission process caused
by telephone line noise and poor signal strength.
Fax documents that are scanned at the printer.
Allow the print driver to send fax.
Save fax numbers as shortcuts on the printer.
Set the maximum speed for sending fax.
93