Lexmark M C240FW User Manual page 72

Use printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
SMTP Server Authentication
No authentication required*
Login / Plain
NTLM
CRAM‑MD5
Digest‑MD5
Kerberos 5
E‑mail Alerts Setup
E‑mail Setup
Device‑Initiated E‑mail
None*
Use Device SMTP Credentials
E‑mail Alerts Setup
E‑mail Setup
Device Userid
E‑mail Alerts Setup
E‑mail Setup
Device Password
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Disabled
Enabled* (5 seconds)
Auto Continue Time
Error Prevention
Auto Reboot
Auto Reboot
Reboot when idle
Reboot always*
Reboot never
Error Prevention
Auto Reboot
Max Auto Reboots (2*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the authentication type for the SMTP server.
Set whether credentials are required for device‑initiated
e‑mails.
Specify the user ID to connect to the SMTP server.
Specify the password to connect to the SMTP server.
Specify the domain name for the NTLM security protocol.
Set the printer to check for jammed paper automatically.
Let the printer continue processing or printing a job
automatically after clearing certain attendance conditions.
Set the printer to restart when an error occurs.
Set the number of automatic reboots that the printer can
perform.
72