Lexmark M C240FW User Manual page 91

Use printer menus
Menu item
Fax Number Masking
Off*
From Left
From Right
Digits to Mask
0–58 (0*)
Enable Line Connected
Detection
On*
Off
Optimize Fax Compatibility
Fax Transport
T.38
Analog
G.711
etherFAX
Note: An asterisk (*) next to a value indicates the factory default setting.
HTTPS Fax Settings
Note: This menu appears only if Fax Transport is set to etherFAX.
Menu item
HTTPS service URL
HTTPS Proxy
HTTPS Proxy User
HTTPS Proxy Password
Fax Send Encryption
Disabled
Enabled*
Required
Fax Receive Encryption
Disabled
Enabled*
Required
HTTPS Fax Status
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the format for masking an outgoing fax number.
Specify the number of digits to mask in an outgoing fax number.
Determine whether a telephone line is connected to the printer.
Note: Detection takes place when turning on the printer and before each call.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
Set the fax transport method.
Notes:
•
This menu item appears only if an etherFAX or Fax over IP (FoIP) license
bundle is installed in the printer.
•
Depending on your printer model, the factory default settings may vary.
Description
Specify the etherFAX service URL.
Specify a proxy server URL.
Specify the user name and password for the proxy server.
Enable encryption for outgoing fax messages.
Enable encryption for incoming fax messages.
Show the etherFAX communication status.
91