Table of Contents
Advertisement
Use printer menus
Menu item
Backup DNS
Backup DNS 2
Backup DNS 3
Domain Search Order
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
On*
Off
WINS Address
Enable BOOTP
Off*
On
Restricted Server List
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
MTU
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Disabled*
Enabled
Enable TLSv1.0
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the backup DNS server addresses.
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify an IP address for the TCP connections.
Notes:
•
This menu item appears only in the Embedded Web Server.
•
Use a comma to separate each IP address.
•
You can add up to 50 IP addresses.
Specify how the IP addresses in the list can access the printer functionality.
Note: This menu item appears only in the Embedded Web Server.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Enable the printer maximum transfer rate.
Enable the TLSv1.0 protocol.
118
Advertisement
Table of Contents
