Table of Contents
Advertisement
1
Adjusting the Tire Pressure
No Parts Required
Procedure
The tires are over-inflated for shipping. Therefore,
release some of the air to reduce the pressure.
Correct air pressure in the front and rear tires is 83
to 103 kPa (12 to 15 psi).
Important:
Maintain even pressure in all tires to
ensure uniform contact with the turf.
2
Adjusting the Step Height
No Parts Required
Procedure
The height of the steps can be adjusted for the
operators comfort.
1.
Remove the 2 bolts and nuts securing the step
brackets to the traction unit frame
1. Step
(Figure
Figure 2
2. Step brackets
2.
Raise or lower the step to the desired height
and re-secure the brackets to the frame with the
2 bolts and nuts.
3.
Repeat the procedure on the other step.
3
Adjusting the Control Arm
Position
No Parts Required
Procedure
The control arm position can be adjusted for the
operators comfort.
1.
Loosen the 2 bolts securing the control arm to
the retaining bracket
2)
1. Control arm
2. Retaining brackets
2.
Rotate the control arm to the desired position
and tighten the 2 bolts.
g003959
13
(Figure
3).
Figure 3
3. Bolts (2)
g004152
Advertisement
Table of Contents
