tion of the "chimney sweep function" at
minimum output in domestic hot water
mode.
• Press the 10 key (Fig. 10.17) to confirm
the value entered and activate the func-
tion (Fig. 10.22).
Fig. 10.22
Flue sweep function at maximum output
in heating mode
• Press the 14 key and the LCD display
shows the number 03, indicating activa-
tion of the "chimney sweep function" at
maximum output in heating mode.
• Press the 10 key (Fig. 10.17) to confirm
the value entered and activate the func-
tion (Fig. 10.23).
Fig. 10.23
Exiting the chimney sweep function
• To exit the chimney sweep, reset the value
of parameter P06 to 00 or wait 15 minutes
with the boiler switched off (OFF).
• Switch off the boiler by pressing button 15
(Fig. 10.17) until the letters OFF appear
on the LCD display (Fig. 10.24).
Fig. 10.24
MAINTENANCE
RESET
bar
RESET
bar
RESET
bar
- 69 -