Door Adjustment - Arrow Storage Products LM10667S Owner's Manual & Assembly Manual

Step 16: Door Install
You will need for this page:
(QTY: 8)
Half-Open Position
Closed Position

Door Adjustment

If Doors do not align, raise or lower one side of the Door by placing
the Door screws through a different set of holes in the Door Slide.
Assemblies from Step 16:
• Right Door Assembly (1)
• Left Door Assembly (1)
Gable
Door Slide
Door Track
INSIDE BUILDING
Door
Front Floor Frame
1
From inside the building, place the bottom
of the Door into the Front Floor Frame
track at about the half-open position.
2
Rotate the Door forward until it is vertical
and align the Door Slides with the Door.
3
Insert two (2) black screws into each Door
Slide as shown below. Repeat steps for
second Door.
37
41AW