Step 7: Wall Framing
You will need for this page:
(QTY: 18)
1
• Install one Side Wall Angle fi rst.
• Install the Rear Wall Angle Assembly second.
• Install the other Side Wall Angle third.
• Install the Door Track Assembly last.
2
Use the number of screws shown. Leave the hole
closest to the Ramp open in each Front Panel as
shown above.
Assemblies from Step 2 and Step 4:
2
8476
•
•
Side Angle
Wall Angles must face inside the building.
8476
ATTACH FRAMES TO INSIDE OF WALL PANELS
Door Track Assembly
Leave these holes open.
Rear Wall Angle Assembly (1)
Door Track Assembly (1)
Door Slides should be in Door Track at this time.
Rear Wall Angle Assembly
20
8476
Long Leg on Top.
Opening Faces In.
Short Leg on Bottom.
20AX