Arrow Storage Products LM10667S Owner's Manual & Assembly Manual page 33

Step 13: Continued
You will need for this page:
(QTY: 24)
(QTY: 16)
Continue to apply weather stripping.
11
Attach Front Left and Right Roof Panels, one at a time, to Roof Beams using
eight (8) screws per Panel. Insert bolt and nut in middle hole where ribs overlap.
12
Secure Front Roof Panels to Gables using fi ve (5) bolts and nuts per Gable.
13
Finish Weather Stripping the Roof and cut the tape just past the end of the Roof.
Fold end of tape under roof edge.
14 Attach Ridge Cap with four (4) bolts and nuts. DO NOT secure end of Ridge Caps
until Peak Caps are in place.
15 On both sides of the building, secure the bottom of Roof Panels to the Side Wall
Angles using screws.
8468
DO NOT fully tighten Ridge Cap bolts
until you have both Ridge Cap bolts in
place. This will ease assembly. Bolts must be fully
tightened before moving on to the next page.
8469
Left Roof
Panel
Front
1 1
8468
Right Roof
Panel
Back
8461
8469
33
1
8461
Ridge Cap
DO NOT secure end of
Ridge Caps until Peak
Caps are in place.
33AXa