Arrow Storage Products LM10667S Owner's Manual & Assembly Manual page 32

Step 13: Continued
You will need for this page:
(QTY: 32)
FASTEN TO RIDGE CAP (NEXT PAGE)
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO NEXT PANEL WITH BOLT AND NUT
DO NOT FASTEN AT THIS TIME
DO NOT fully tighten Ridge Cap bolts until you
have both Ridge Cap bolts in place. This will ease
assembly. Bolts must be fully tightened before moving on
to the next page.
(QTY: 4)
6529
2
6529
• Skylight Assemblies (2)
Roof Panel
Continue to apply weather stripping.
9
Attach two (2) Roof Panels and two (2)
Skylight Assemblies using the diagram to
the left while assembling the roof.
Do not fasten the holes on the lower end
10
of the Panels. Double check that Panels
are installed in the correct position. The
part numbers listed in the Roof Panel Placement
diagram on page 29 must match the numbers
inked on the Panels.
Skylight
Assembly
32
6529
Skylight
Assembly
32AX