Table of Contents
Advertisement
68012006035-FA
Chapter 24 : Call Alert Paging
Chapter 24
Call Alert Paging
This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.
Depending on how your radio is programmed, if there is no answer after the maximum ring time or
when you press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert
page.
NOTE: This feature must be programmed by a qualified radio technician.
24.1
Sending Call Alert Page
NOTE: If the feature inactivity timer is enabled, your radio automatically exits the feature when
your radio is left idle long enough for the time to expire. You hear a tone upon feature exit.
Procedure:
Send a call alert page by using one of the following options:
Option
Sending a call alert page using the
radio menu Page
Sending a call alert page using the
radio menu Call
If the call alert page is sent successfully, your radio shows the following indications:
•
Four tones sound.
•
The display shows a positive notification.
•
The radio returns to the Home screen.
If the call alert page is not acknowledged, the radio shows the following indications:
•
A tone sounds.
•
The display shows a negative notification.
98
Actions
a Press the Page menu item.
b Select the required ID.
c To send the page, press the PTT button.
a Press the Call menu item.
b Select the required ID or alias.
c To call, press the PTT button.
If the target radio does not respond after a pro-
grammed period, the display shows Send page?.
d To send the page, press Yes.
Advertisement
Table of Contents
